GIMP

8 Dicembre 2023 Disegno, Gimp, Gimpo

Inserire Script in Gimp

Script per aggiungere delle frecce:

; Berengar W. Lehr (Berengar.Lehr@gmx.de)
; Medical Physics Group, Department of Diagnostic and Interventional Radiology
; Jena University Hospital, 07743 Jena, Thueringen, Germany
;
; This program is free software; you can redistribute it and/or modify
; it under the terms of the GNU General Public License as published by
; the Free Software Foundation; either version 2 of the License, or
; (at your option) any later version.
;
; This program is distributed in the hope that it will be useful,
; but WITHOUT ANY WARRANTY; without even the implied warranty of
; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
; GNU General Public License for more details.
;
; If you use this script and/or like it the author would be happy to
; receive a postcard from you:
;
; You should have received a copy of the GNU General Public License
; along with this program; if not, write to the Free Software
; Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
;
; Versionhistory:
;   11/10/2009 first release
;   11/15/2009 Added fixed brush width and double headed error, removed bug 1) one-point-paths, 2) horizontal paths
;   11/16/2009 Fixed image type restriction string
;   11/19/2009 Added feature for absolute wing length, fixed handling gray-scale images
;   25/01/2010 Fixed fixed opacity bug (thanks to Richard)
;	20/07/2010 Report an error and terminate the script if the path only has one point.
;              Display a warning message if the path has more than two points
;              Display a warning message if there is more than one path
;              Delete the path by default.
;              Temporarily set the brush mode to 'Normal' (arrows are not drawn normally if 'Disolve'
;				mode (for example) is selected).
;	22/07/2013 Allow curved arrows
;   11/9/2014 - setting the radius of the brush when defining the new brush seems to have no effect in GIMP 2.8.14 - it
;       uses the radius of the brush as specified in the toolbox. These mods save the radius of the
;       toolbox brush, sets the new brush to be the default brush and then sets the radius of the toolbox brush.
;       The toolbox brush radius is then restored afterwards
;   16/9/2014 Use gimp-context-push and gimp-context-pop rather than saving the toolbox brush and radius explicitly
;   20/12/2016 Corrected the drawing of arrow heads at the end of paths that have more than 2 points
;              Added extra controls to determine whether the wing length and brush thickness are related to the path
;                length or in absolute pixels. This is instead of using negative numbers for relative settings and
;                positive numbers for absolute pixel values.
;              Added patches, supplied by Helmut, to allow the script to work in GIMP V2.9/V2.10
;              Removed previous edit comments and commented out code
;              The warning about paths with more than 2 points is now only given once following an activation of GIMP
;                or a refresh of the Script-Fu scripts
;              Swapped the up/down cursor key actions with the page up/down actions for the LoW and BT value fields
;                (the page keys now increment/decrement by 10 and the up/down keys by 1)
;    22/12/2016 Changed "Delete path after arrow was drawn?" to "Delete path after arrow is drawn?"
;    4/9/2017 Changed the final line of the message displayed when the active path has more than two points from
;             "The first and last points are used" to "The first and second points are used" There is no change to the
;             operation of the script. The old message related to the original behaviour of the script.
;
;              programmer_ceds A T yahoo D O T co D O T uk
;
(define pi (* 4 (atan 1.0)))

(define multi_points_reported 0)       ; set non-zero once the warning about a path with more than 2 points has been displayed

(define
    (script-fu-help-1Arrow
        inPointToX
        inPointToY
        inPointFromX
        inPointFromY
        theWingLength
        WingAngle
        drawable
        image
        FullHead
        MiddlePoint
    )
    (let*
        (
        ; calculate absolute angle of both wings in image from relative angle
        ; between wings and arrow-tail and absolute angle of arrow-tail
        (theArrowAngle (if (= (- inPointToY inPointFromY) 0)
            (/ pi (if (< (- inPointToX inPointFromX) 0) 2 -2))
            (+ (atan (/ (- inPointToX inPointFromX) (- inPointToY inPointFromY))) (if (> inPointToY inPointFromY) pi 0))
        ))
        (theLeftAngle  (+ theArrowAngle WingAngle))
        (theRightAngle (- theArrowAngle WingAngle))

        ; calculate end points of both wings
        (theLeftWingEndPointX  (+ inPointToX (* theWingLength (sin theLeftAngle))))
        (theLeftWingEndPointY  (+ inPointToY (* theWingLength (cos theLeftAngle))))
        (theRightWingEndPointX (+ inPointToX (* theWingLength (sin theRightAngle))))
        (theRightWingEndPointY (+ inPointToY (* theWingLength (cos theRightAngle))))

        (points          (cons-array 4 'double))
        (theMiddleWingEndPointX 0)    (theMiddleWingEndPointY 0)
		(PreviousOpacity 100.0)
		(PreviousPaintMode 0)
        )
        (begin
		(set! PreviousOpacity (car (gimp-context-get-opacity)))
		(gimp-context-set-opacity 100.0)
		(set! PreviousPaintMode (car (gimp-context-get-paint-mode)))
        (gimp-context-set-paint-mode NORMAL-MODE)
   
        ; collect points for arrow-tail and draw them
		; Now draw the arrow tail along the path in the higher level function rather than a straight line here     
        ; accordingly for left wing
        (aset points 0 inPointToX)               (aset points 1 inPointToY)
        (aset points 2 theLeftWingEndPointX)     (aset points 3 theLeftWingEndPointY)
        (gimp-paintbrush-default drawable 4 points) (set! points (cons-array 4 'double))
        ; accordingly for right wing
        (aset points 0 inPointToX)               (aset points 1 inPointToY)
        (aset points 2 theRightWingEndPointX)    (aset points 3 theRightWingEndPointY)
        (gimp-paintbrush-default drawable 4 points)

        ; only if head is to be filled
        (if (= FullHead 1) (begin
            ; calculate intersection of connection between the wings end points and arrow tail
            ; shrink distance between this point and arrow head if MiddlePoint < 100
            (set! theMiddleWingEndPointX (+ inPointToX
                                            (* (/ MiddlePoint 100) (- (/ (+ theLeftWingEndPointX theRightWingEndPointX) 2) inPointToX))
                                         ))
            (set! theMiddleWingEndPointY (+ inPointToY
                                            (* (/ MiddlePoint 100) (- (/ (+ theLeftWingEndPointY theRightWingEndPointY) 2) inPointToY))
                                         ))

            ; collect points for left wing end - intersection - right wing end & draw it
            (set! points (cons-array 6 'double))
            (aset points 0 theLeftWingEndPointX)      (aset points 1 theLeftWingEndPointY)
            (aset points 2 theMiddleWingEndPointX)    (aset points 3 theMiddleWingEndPointY)
            (aset points 4 theRightWingEndPointX)     (aset points 5 theRightWingEndPointY)
            (gimp-paintbrush-default drawable 6 points)

            ; collect points to create selection which will be filled with FG color
            (set! points (cons-array 8 'double))
            (aset points 0 inPointToX)                (aset points 1 inPointToY)
            (aset points 2 theLeftWingEndPointX)      (aset points 3 theLeftWingEndPointY)
            (aset points 4 theMiddleWingEndPointX)    (aset points 5 theMiddleWingEndPointY)
            (aset points 6 theRightWingEndPointX)     (aset points 7 theRightWingEndPointY)
            (gimp-image-select-polygon image CHANNEL-OP-REPLACE 8 points)
            (gimp-edit-bucket-fill drawable FG-BUCKET-FILL NORMAL-MODE 100 0 FALSE 0 0)
            (gimp-selection-none image)
        ))
		(gimp-context-set-paint-mode PreviousPaintMode)
		(gimp-context-set-opacity PreviousOpacity)
        ) ; begin
    ) ; let
) ; define

;-----------------------------------------------------------------------------------------
;
; Draw an arrow with curved wings
;
; On entry:
;		P0x..P3y = the x,y coordinates of P0, P1, P2 and P3 for the Bézier curve
;		t = the value of t at the back of the arrow
;		half_wing_width = half the width of the back of the arrow (maximum wing width)
;		drawable = the drawable
;		image = the image
;		full_head = 1 if the arrow head is to be filled, 0 otherwise
;		middle_point = the percentage of the arrow length that is to be filled (iff full_head == 1)
;				(75% fills more of the head than 25%)
;		num_points = the number of points to use to construct the wings (3..99) (excludes the tip of the arrow)
;		P0_end = 1 if the arrow is to be drawn at the P0 end of the path, = 0 for the P3 end
;		
(define
    (Draw_Curved_Wing_Arrow
        P0x P0y P1x P1y P2x P2y P3x P3y
		t
        half_wing_width
        drawable
        image
        full_head
        middle_point
		num_points
		P0_end
		arrow_length
    )
    (let*
        (
        (points1		(cons-array 200 'double))			; points for one wing ...
        (points2		(cons-array 200 'double))			; ... and the other
        (notch_points	(cons-array 6 'double))
		(in_fill_points (cons-array 406 'double))			; used when filling the head of the arrow
		(PreviousOpacity 100.0)
		(PreviousPaintMode 0)
		(count 1)
		(t_adjustment 0.0)
		(t_middle_point 0.0)
		(bezier_results '(0.0 0.0))
		(arrow_width 0.0)
		(x 0.0)												; poisiton on the path
		(y 0.0)												; poisiton on the path
		(x_deriv 0.0)										; derivative wrt t of x
		(y_deriv 0.0)										; derivative wrt t of y
		(hypot 0.0)											; sqrt( x_deriv^2 + y_deriv^2)
		(x_modifier 0.0)
		(y_modifier 0.0)
		(points_index 0)
		(x_diff 0.0)
		(y_diff 0.0)
        )

		(if (= P0_end 1)
			(begin
				(set! t_adjustment (/ t num_points))
				(set! t_middle_point (* t middle_point))
				(set! t_middle_point (/ t_middle_point 100.0))
				(set! t 0.0)								; start at P0
				(aset points1 0 P0x)						; set first point on one side of the arrowhead ...
				(aset points1 1 P0y)
				(aset points2 0 P0x)						; ... and the other
				(aset points2 1 P0y)
			)
			(begin
				(set! t_middle_point (- 1.0 t))
				(set! t_adjustment (/ t_middle_point num_points))
				(set! t_adjustment (- 0.0 t_adjustment))
				(set! t_middle_point (* t_middle_point middle_point))
				(set! t_middle_point (/ t_middle_point 100.0))
				(set! t_middle_point (- 1.0 t_middle_point))
				(set! t 1.0)								; start at P3
				(aset points1 0 P3x)						; set first point on one side of the arrowhead ...
				(aset points1 1 P3y)
				(aset points2 0 P3x)						; ... and the other
				(aset points2 1 P3y)
			)
		)	; end - if

		; set the middle part of notch points based on t_middle_point in case the head has to be filled

		(aset notch_points 2 (car (Bezier_Coords P0x P1x P2x P3x t_middle_point)))
		(aset notch_points 3 (car (Bezier_Coords P0y P1y P2y P3y t_middle_point)))


 		(set! PreviousOpacity (car (gimp-context-get-opacity)))
		(gimp-context-set-opacity 100.0)
		(set! PreviousPaintMode (car (gimp-context-get-paint-mode)))
        (gimp-context-set-paint-mode NORMAL-MODE)
   
		(set! count 1)
		(set! points_index 2)
		(while (<= count num_points)
			(set! t (+ t t_adjustment))
			(set! bezier_results (Bezier_Coords P0x P1x P2x P3x t))
			(set! x (car bezier_results))
			(set! x_deriv (cadr bezier_results))
			(set! bezier_results (Bezier_Coords P0y P1y P2y P3y t))
			(set! y (car bezier_results))
			(set! y_deriv (cadr bezier_results))

											; calculate the width of the arrow based on the direct distance of
											; x and y from the tip of the arrow (calculating the width with equal
											; steps for each step in t gives a rounded tip to the arrow)
			(set! x_diff (- (aref points1 0) x))
			(set! y_diff (- (aref points1 1) y))
			(set! hypot (sqrt (+ (* x_diff x_diff) (* y_diff y_diff))))
			(set! arrow_width (/ (* hypot half_wing_width) arrow_length))

			(set! hypot (sqrt (+ (* x_deriv x_deriv) (* y_deriv y_deriv))))

			(if (> hypot 0.0)
				(begin
					(set! x_modifier (/ (* y_deriv arrow_width) hypot))
					(set! y_modifier (/ (* x_deriv arrow_width) hypot))
					(aset points1 points_index (+ x x_modifier))
					(aset points2 points_index (- x x_modifier))
					(set! points_index (+ points_index 1))
					(aset points1 points_index (- y y_modifier))
					(aset points2 points_index (+ y y_modifier))
					(set! points_index (+ points_index 1))
				)
				(begin								; avoid division by 0
					(aset points1 points_index x)
					(aset points2 points_index x)
					(set! points_index (+ points_index 1))
					(aset points1 points_index y)
					(aset points2 points_index y)
					(set! points_index (+ points_index 1))
				)
			)	; end - if
 			(set! count (+ count 1))
		)	; end - while

        ; draw the one wing
        (gimp-paintbrush-default drawable points_index points1)


        ; draw the other wing
        (gimp-paintbrush-default drawable points_index points2)

        ; only if head is to be filled
		(if (= full_head 1)
			(begin
				(set! points_index (- points_index 1))
				(aset notch_points 1 (aref points1 points_index))	; y coord
				(aset notch_points 5 (aref points2 points_index))	; y coord
				(set! points_index (- points_index 1))
				(aset notch_points 0 (aref points1 points_index))	; x coord
				(aset notch_points 4 (aref points2 points_index))	; x coord
				(gimp-paintbrush-default drawable 6 notch_points)

				(set! points_index 0)
				(set! x 0)
				(set! num_points (* num_points 2))
				(while (< points_index num_points)
					(aset in_fill_points x (aref points1 points_index))
					(set! x (+ x 1))
					(set! points_index (+ points_index 1))
				)	; end - while

				(set! y 0)
				(while (< y 6)
					(aset in_fill_points x (aref notch_points y))
					(set! y (+ y 1))
					(set! x (+ x 1))
				)	; end - while

				(while (> points_index 0)
					(set! points_index (- points_index 1))
					(set! y (aref points2 points_index))
					(set! points_index (- points_index 1))
					(aset in_fill_points x (aref points2 points_index))
					(set! x (+ x 1))
					(aset in_fill_points x y)
					(set! x (+ x 1))
				)	; end - while

				(set! num_points (* num_points 2))
				(set! num_points (+ num_points 6))
                (gimp-image-select-polygon image CHANNEL-OP-REPLACE num_points in_fill_points)
				(gimp-edit-bucket-fill drawable FG-BUCKET-FILL NORMAL-MODE 100 0 FALSE 0 0)
				(gimp-selection-none image)
			)	; end -begin
		)	; end - if
		(gimp-context-set-paint-mode PreviousPaintMode)
		(gimp-context-set-opacity PreviousOpacity)
    ) ; let
) ; end - define Draw_Curved_Wing_Arrow()

;---------------------------------------------------------------------------------
;
; Return the x or y coordinate for a given value of t (0..1).
; Also return the first derivative for x or y at that point
;
; The equation for the Bézier curve is:
;
;	B(t) = (1 - t)^3*P0 + 3(1 - t)^2*t*P1 + 3(1-t)*t^2*P2 + t^3*P3
;
; This can be rewritten as:
;
;   t^3(P3 - 3P2 + 3P1 - P0) +
;   t^2(3P2 - 6P1 + 3P0) +
;	t(3P1 - 3P0) +
;	P0
;
; the first derivative is then:
;
;   3t^2(P3 - 3P2 + 3P1 - P0) +
;   2t(3P2 - 6P1 + 3P0) +
;	(3P1 - 3P0) +
;
; The x or y coordinate of the point is returned as the first item of a list and the
; first derivative of the point as the second item.
;

(define (Bezier_Coords P0 P1 P2 P3 t)
	(let* (
		(result 0.0)
		(derivative 0.0)						; first derivative
		(term1 0.0)								; P3 - 3P2 + 3P1 - P0
		(term2 0.0)								; P2 - 2P1 + P0
		(term3 0.0)								; P1 - P0
		(t_cubed 0.0)							; t^3
		(t_squared 0.0)							; t^2
		)
	(set! t_squared (* t t))
	(set! t_cubed (* t_squared t))
	(set! term1 (- P1 P2))
	(set! term1 (* term1 3))
	(set! term1 (+ term1 P3))
	(set! term1 (- term1 P0))

	(set! term2 (* P2 3))
	(set! term2 (- term2 (* P1 6)))
	(set! term2 (+ term2 (* P0 3)))

	(set! term3 (- P1 P0))
	(set! term3 (* term3 3))

	(set! result (* t_cubed term1))
	(set! result (+ result (* t_squared term2)))
	(set! result (+ result (* t term3)))
	(set! result (+ result P0))

	(set! derivative (* t_squared (* term1 3)))
	(set! derivative (+ derivative (* t (* term2 2))))
	(set! derivative (+ derivative term3))
	
	(list
		result
		derivative
	)
	)	; end - let
)	; define Bezier_Coords

;---------------------------------------------------------------------------------

(define
    (script-fu-draw-arrow
        image
		drawable
        WingLengthFactor
        WingLengthType
        WingAngle
        FullHead
        MiddlePoint
        BrushThicknessFactor
        BrushThicknessType
        useFirstPointArrowAsHead
        usePathThenRemove
        useNewLayer
        useDoubleHeadArrow
		CurvedArrowhead
		CurvedArrowheadPoints
    )
    (let*
        (
        (theActiveVector (car   (gimp-image-get-active-vectors image)))
        (theNumVectors (car   (gimp-image-get-vectors image)))
        (theFirstStroke  0)          (theStrokePoints 0)
        (theNumPoints    0)
        (inPoint_1X      0)          (inPoint_1Y      0)	; point 1 is for the arrow at the start of the path
															;  - the centre of the arrow lies along the section of the
															;  that joins the first two points (may be the only 2 points)
        (inPoint_2X      0)          (inPoint_2Y      0)    ; point2 is for the arrow at the end of the path
 															;  - the centre of the arrow lies along the section of the
															;  that joins the last two points (may be the only 2 points)
		(Bezier_x		 0.0)
		(Bezier_y		 0.0)
		(arrow_depth 0.0)
		(t 0.0)
		(new_length 0.0)
		(i 0.0)
		(adjustment 0.0)
		(x_diff 0.0)
		(y_diff 0.0)
		(half_arrowhead_width 0.0)

        (theArrowLength 0)            (theWingLength 0)
        (oldLayer (car (gimp-image-get-active-layer image)))

        (brushName    "arrowBrush")
        )

;---------------------------------------------------------------------------------
;		La versione originale di queste 2 "define" era:
;       (define FACTOR_RELATIVE_TO_PATH_LENGTH 0)
;       (define FACTOR_IN_ABSOLUTE_PIXELS 1)
;
;		Io ho solo invertito il loro ordine (e i valori), per avere un altro default.
;		In questo modo le linee e le frecce hanno sempre uguale spessore.
;		Nella versione originale, questo spessore è proporzionale alla lunghezza del tracciato
;		e questo fa sì che ogni volta le frecce siano diverse una dall'altra.
;		Personalmente preferisco il "mio" sistema - Ripley
;		
;		Inoltre ho modificato l'ordine delle stringhe nelle LIST [SF-OPTION] in fondo al listato
;		(e qualche altro valore numerico)
;
;		Questa era la versione originale
;	Riga 698	SF-OPTION      "Length of wings type"            (list "Path length divided by LoW value" "LoW Pixels")
;	Riga 703	SF-OPTION      "Brush thickness type"            (list "Path length divided by BT value" "BT Pixels")
;---------------------------------------------------------------------------------

       (define FACTOR_IN_ABSOLUTE_PIXELS 0)
       (define FACTOR_RELATIVE_TO_PATH_LENGTH 1)

        (if (not (= theActiveVector -1)) (begin
            (gimp-image-undo-group-start image)

            (gimp-context-push)

            ; create new layer if asked to do so
            (if (= useNewLayer 1) (begin
                (set! drawable (car (gimp-layer-new image (car (gimp-image-width     image))
                                                          (car (gimp-image-height    image))
                                                          (+ 1 (* 2 (car (gimp-image-base-type image))))
                                                          "Arrow" 100 NORMAL-MODE )))
                (gimp-image-insert-layer image drawable 0 0)
                ; set new layer completely transparent
                (gimp-layer-add-mask drawable (car (gimp-layer-create-mask drawable ADD-BLACK-MASK)))
                (gimp-layer-remove-mask drawable MASK-APPLY)
            ))

			(if (> theNumVectors 1)
				(gimp-message "There is more than one path defined -\nthe active path defines the arrow")
			)	; end - if

            ; get path/vector points
            (set! theFirstStroke  (aref  (cadr (gimp-vectors-get-strokes theActiveVector)) 0))
            (set! theStrokePoints (caddr (gimp-vectors-stroke-get-points theActiveVector theFirstStroke)))
            (set! theNumPoints    (cadr  (gimp-vectors-stroke-get-points theActiveVector theFirstStroke)))

			(if (< theNumPoints 12)
				(begin
					(gimp-image-undo-group-end image)
					(error '(This script needs a path with two points) (/ theNumPoints 6))
				)	; end - begin
			)	; end - if

			(if (and (> theNumPoints 12) (= 0 multi_points_reported))
                (begin
                    (gimp-message "This script needs a path with two points\nto position the arrow head and tail.\n\nThe path has more than two points\nThe first and second points are used")
                    (set! multi_points_reported 1)     ; only report this once per activation of GIMP
                 ) ; end - begin
			)	; end - if

            ; get position of arrow head and arrow tail from active vector
            (set! inPoint_1X    (aref theStrokePoints 2))	                    ; for the arrow at the start of the path
            (set! inPoint_1Y    (aref theStrokePoints 3))
            (set! inPoint_2X    (aref theStrokePoints (- theNumPoints 4)))		; for the arrow at the end of the path
            (set! inPoint_2Y    (aref theStrokePoints (- theNumPoints 3)))
   
            ; calculate length of arrows depending on the length of the whole arrow
			(set! theArrowLength	(car (gimp-vectors-stroke-get-length theActiveVector 1 3.0)))
            (if (= WingLengthType FACTOR_RELATIVE_TO_PATH_LENGTH)
            	(set! theWingLength (/ theArrowLength WingLengthFactor))
            	(set! theWingLength WingLengthFactor)
            )

            ; define new brush for drawing operation
            (gimp-brush-new brushName)
            (gimp-brush-set-shape brushName BRUSH-GENERATED-CIRCLE)
            (gimp-brush-set-spikes brushName 2)
            (gimp-brush-set-hardness brushName 1.00)
            (gimp-brush-set-aspect-ratio brushName 1.0)
            (gimp-brush-set-angle brushName 0.0)
            (gimp-brush-set-spacing brushName 1.0)

;		Setting the radius of the brush at this time seems to have no effect in GIMP 2.8.14 - it
;       uses the radius of the brush as specified in the toolbox. As a work-around the mod saves the radius of the
;       toolbox brush, sets the new brush to be the default brush and then sets the radius of the toolbox brush. The
;       toolbox brush radius is then restored afterwards
;

            (gimp-context-set-brush brushName)

            ; set radius of brush according to length of arrow or to a set value
            (if (= BrushThicknessType FACTOR_RELATIVE_TO_PATH_LENGTH)
                (gimp-context-set-brush-size (/ theArrowLength BrushThicknessFactor))
                (gimp-context-set-brush-size BrushThicknessFactor)
            )

			(set! arrow_depth (* theWingLength (cos (* (/ WingAngle 180) pi))))	; the depth of the arrowhead

			(set! half_arrowhead_width (sqrt (- (* theWingLength theWingLength) (* arrow_depth arrow_depth))))

			; now find the line that is the arrowhead depth with one end at the first end of the path and the other
			; on the path

			(set! i 0.0)
			(set! t 0.5)
			(set! adjustment 0.25)
			(while (< i 16.0)
				(set! Bezier_x (car (Bezier_Coords (aref theStrokePoints 2)
										  (aref theStrokePoints 4)
										  (aref theStrokePoints 6)
										  (aref theStrokePoints 8)
										  t)))

				(set! Bezier_y (car (Bezier_Coords (aref theStrokePoints 3)
										  (aref theStrokePoints 5)
										  (aref theStrokePoints 7)
										  (aref theStrokePoints 9)
										  t)))
				(set! x_diff (- (aref theStrokePoints 2) Bezier_x))
				(set! y_diff (- (aref theStrokePoints 3) Bezier_y))
				(set! new_length (sqrt (+ (* x_diff x_diff) (* y_diff y_diff))))
				(if (< new_length arrow_depth)
					(set! t (+ t adjustment))
					(set! t (- t adjustment))
				)
				(set! adjustment (/ adjustment 2))
				(set! i (+ i 1.0))
			)	; end - while
 
			(if (or (= useFirstPointArrowAsHead 1) (= useDoubleHeadArrow 1))
				(if (= CurvedArrowhead 1)
					(begin
						(Draw_Curved_Wing_Arrow (aref theStrokePoints 2)
												(aref theStrokePoints 3)
												(aref theStrokePoints 4)
												(aref theStrokePoints 5)
												(aref theStrokePoints 6)
												(aref theStrokePoints 7)
												(aref theStrokePoints 8)
												(aref theStrokePoints 9)
												t
												half_arrowhead_width
												drawable image
												FullHead
												MiddlePoint
												CurvedArrowheadPoints
												1
												arrow_depth)
					)	; end - begin
					(begin
                		(script-fu-help-1Arrow inPoint_1X inPoint_1Y Bezier_x Bezier_y theWingLength (* (/ WingAngle 180) pi) drawable image FullHead MiddlePoint)
					)	; end - begin
				) ; end - if
			) ; end - if

			; now find the line that is the arrowhead depth with one end at the second end of the path and the other
			; on the path

			(set! i 0.0)
			(set! t 0.5)
			(set! adjustment 0.25)
			(while (< i 16.0)
				(set! Bezier_x (car (Bezier_Coords (aref theStrokePoints (- theNumPoints 10))
										  (aref theStrokePoints (- theNumPoints 8))
										  (aref theStrokePoints (- theNumPoints 6))
										  (aref theStrokePoints (- theNumPoints 4))
										  t)))

				(set! Bezier_y (car (Bezier_Coords (aref theStrokePoints (- theNumPoints 9))
										  (aref theStrokePoints (- theNumPoints 7))
										  (aref theStrokePoints (- theNumPoints 5))
										  (aref theStrokePoints (- theNumPoints 3))
										  t)))
				(set! x_diff (- (aref theStrokePoints (- theNumPoints 4)) Bezier_x))
				(set! y_diff (- (aref theStrokePoints (- theNumPoints 3)) Bezier_y))
				(set! new_length (sqrt (+ (* x_diff x_diff) (* y_diff y_diff))))
				(if (< new_length arrow_depth)
					(set! t (- t adjustment))
					(set! t (+ t adjustment))
				)
				(set! adjustment (/ adjustment 2))
				(set! i (+ i 1.0))
			)	; end - while


            (if (or (= useFirstPointArrowAsHead 0) (= useDoubleHeadArrow 1))
				(if (= CurvedArrowhead 1)
					(begin
						(Draw_Curved_Wing_Arrow (aref theStrokePoints (- theNumPoints 10))
												(aref theStrokePoints (- theNumPoints 9))
												(aref theStrokePoints (- theNumPoints 8))
												(aref theStrokePoints (- theNumPoints 7))
												(aref theStrokePoints (- theNumPoints 6))
												(aref theStrokePoints (- theNumPoints 5))
												(aref theStrokePoints (- theNumPoints 4))
												(aref theStrokePoints (- theNumPoints 3))
												t
												half_arrowhead_width
												drawable image
												FullHead
												MiddlePoint
												CurvedArrowheadPoints
												0
												arrow_depth)
					)	; end - begin
					(begin
                		(script-fu-help-1Arrow inPoint_2X inPoint_2Y Bezier_x Bezier_y theWingLength (* (/ WingAngle 180) pi) drawable image FullHead MiddlePoint)
					) ; end - begin
				) ; end - if
			) ; end - if

			(gimp-edit-stroke-vectors drawable theActiveVector)		; draw the shaft of the arrow along the path

            (gimp-brush-delete brushName)

            (gimp-context-pop)

            (if (= usePathThenRemove 1) (gimp-image-remove-vectors image theActiveVector))

            (if (= useNewLayer 1) (begin
                (plug-in-autocrop-layer TRUE image drawable)
                (gimp-image-set-active-layer image oldLayer)
            ))
            (gimp-displays-flush)
            (gimp-image-undo-group-end image)
        )	; end - begin
		(gimp-message "This script needs a path with two points\nto position the arrow head and tail (first and last point of path is used)")
	  )	; end - if
    ) ; let*
); define

; Register the function with GIMP:

(script-fu-register "script-fu-draw-arrow"
  _"<Image>/Tools/Arrow..."
  _"Draw a nearly arbitrary arrow in your image"
  "Berengar W. Lehr <B-Ranger@web.de>"
  "2009, Berengar W. Lehr / MPG@IDIR, UH Jena, Germany."
  "19th November 2009"
  "*"
  SF-IMAGE       "The image"   0
  SF-DRAWABLE    "The drawable"   0
  SF-ADJUSTMENT  "Length of wings (LoW)" '(50 1 500 1 10 1 1)
  SF-OPTION      "Length of wings type"            (list "LoW Pixels" "Path length divided by LoW value")
  SF-ADJUSTMENT  "Angle between arrow and wing in degrees" '(20 5 85 5 15 0 0)
  SF-TOGGLE      "Fill head of arrow?" TRUE
  SF-ADJUSTMENT  "Percentage size of notch of arrow head\n(only valid if head of arrow is filled)" '(75 0 100 1 10 0 1)
  SF-ADJUSTMENT  "Brush thickness (BT)" '(10 1 500 1 10 0 1)
  SF-OPTION      "Brush thickness type"            (list "BT Pixels" "Path length divided by BT value")
  SF-TOGGLE      "Use first path point as arrow head?\n(if not the last path point of is used as arrow head)" FALSE
  SF-TOGGLE      "Delete path after arrow is drawn?" TRUE
  SF-TOGGLE      "Use new layer for arrow?" TRUE
  SF-TOGGLE      "Draw double headed arrow?" FALSE
  SF-TOGGLE      "Curved arrow wings? (only for curved paths)" FALSE
  SF-ADJUSTMENT  "Points for curved arrow wing (2 to 99)" '(20 2 99 1 10 0 1)
)

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249

250

251

252

253

254

255

256

257

258

259

260

261

262

263

264

265

266

267

268

269

270

271

272

273

274

275

276

277

278

279

280

281

282

283

284

285

286

287

288

289

290

291

292

293

294

295

296

297

298

299

300

301

302

303

304

305

306

307

308

309

310

311

312

313

314

315

316

317

318

319

320

321

322

323

324

325

326

327

328

329

330

331

332

333

334

335

336

337

338

339

340

341

342

343

344

345

346

347

348

349

350

351

352

353

354

355

356

357

358

359

360

361

362

363

364

365

366

367

368

369

370

371

372

373

374

375

376

377

378

379

380

381

382

383

384

385

386

387

388

389

390

391

392

393

394

395

396

397

398

399

400

401

402

403

404

405

406

407

408

409

410

411

412

413

414

415

416

417

418

419

420

421

422

423

424

425

426

427

428

429

430

431

432

433

434

435

436

437

438

439

440

441

442

443

444

445

446

447

448

449

450

451

452

453

454

455

456

457

458

459

460

461

462

463

464

465

466

467

468

469

470

471

472

473

474

475

476

477

478

479

480

481

482

483

484

485

486

487

488

489

490

491

492

493

494

495

496

497

498

499

500

501

502

503

504

505

506

507

508

509

510

511

512

513

514

515

516

517

518

519

520

521

522

523

524

525

526

527

528

529

530

531

532

533

534

535

536

537

538

539

540

541

542

543

544

545

546

547

548

549

550

551

552

553

554

555

556

557

558

559

560

561

562

563

564

565

566

567

568

569

570

571

572

573

574

575

576

577

578

579

580

581

582

583

584

585

586

587

588

589

590

591

592

593

594

595

596

597

598

599

600

601

602

603

604

605

606

607

608

609

610

611

612

613

614

615

616

617

618

619

620

621

622

623

624

625

626

627

628

629

630

631

632

633

634

635

636

637

638

639

640

641

642

643

644

645

646

647

648

649

650

651

652

653

654

655

656

657

658

659

660

661

662

663

664

665

666

667

668

669

670

671

672

673

674

675

676

677

678

679

680

681

682

683

684

685

686

687

688

689

690

691

692

693

694

695

696

697

698

699

700

701

702

703

704

705

706

707

708

709

710

; Berengar W. Lehr (Berengar.Lehr@gmx.de)

; Medical Physics Group, Department of Diagnostic and Interventional Radiology

; Jena University Hospital, 07743 Jena, Thueringen, Germany

;

; This program is free software; you can redistribute it and/or modify

; it under the terms of the GNU General Public License as published by

; the Free Software Foundation; either version 2 of the License, or

; (at your option) any later version.

;

; This program is distributed in the hope that it will be useful,

; but WITHOUT ANY WARRANTY; without even the implied warranty of

; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

; GNU General Public License for more details.

;

; If you use this script and/or like it the author would be happy to

; receive a postcard from you:

;

; You should have received a copy of the GNU General Public License

; along with this program; if not, write to the Free Software

; Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

;

; Versionhistory:

; 11/10/2009 first release

; 11/15/2009 Added fixed brush width and double headed error, removed bug 1) one-point-paths, 2) horizontal paths

; 11/16/2009 Fixed image type restriction string

; 11/19/2009 Added feature for absolute wing length, fixed handling gray-scale images

; 25/01/2010 Fixed fixed opacity bug (thanks to Richard)

; 20/07/2010 Report an error and terminate the script if the path only has one point.

; Display a warning message if the path has more than two points

; Display a warning message if there is more than one path

; Delete the path by default.

; Temporarily set the brush mode to 'Normal' (arrows are not drawn normally if 'Disolve'

; mode (for example) is selected).

; 22/07/2013 Allow curved arrows

; 11/9/2014 - setting the radius of the brush when defining the new brush seems to have no effect in GIMP 2.8.14 - it

; uses the radius of the brush as specified in the toolbox. These mods save the radius of the

; toolbox brush, sets the new brush to be the default brush and then sets the radius of the toolbox brush.

; The toolbox brush radius is then restored afterwards

; 16/9/2014 Use gimp-context-push and gimp-context-pop rather than saving the toolbox brush and radius explicitly

; 20/12/2016 Corrected the drawing of arrow heads at the end of paths that have more than 2 points

; Added extra controls to determine whether the wing length and brush thickness are related to the path

; length or in absolute pixels. This is instead of using negative numbers for relative settings and

; positive numbers for absolute pixel values.

; Added patches, supplied by Helmut, to allow the script to work in GIMP V2.9/V2.10

; Removed previous edit comments and commented out code

; The warning about paths with more than 2 points is now only given once following an activation of GIMP

; or a refresh of the Script-Fu scripts

; Swapped the up/down cursor key actions with the page up/down actions for the LoW and BT value fields

; (the page keys now increment/decrement by 10 and the up/down keys by 1)

; 22/12/2016 Changed "Delete path after arrow was drawn?" to "Delete path after arrow is drawn?"

; 4/9/2017 Changed the final line of the message displayed when the active path has more than two points from

; "The first and last points are used" to "The first and second points are used" There is no change to the

; operation of the script. The old message related to the original behaviour of the script.

;

; programmer_ceds A T yahoo D O T co D O T uk

;

(define pi (* 4 (atan 1.0)))

(define multi_points_reported 0) ; set non-zero once the warning about a path with more than 2 points has been displayed

(define

(script-fu-help-1Arrow

inPointToX

inPointToY

inPointFromX

inPointFromY

theWingLength

WingAngle

drawable

image

FullHead

MiddlePoint

)

(let*

(

; calculate absolute angle of both wings in image from relative angle

; between wings and arrow-tail and absolute angle of arrow-tail

(theArrowAngle (if (= (- inPointToY inPointFromY) 0)

(/ pi (if (< (- inPointToX inPointFromX) 0) 2 -2))

(+ (atan (/ (- inPointToX inPointFromX) (- inPointToY inPointFromY))) (if (> inPointToY inPointFromY) pi 0))

))

(theLeftAngle (+ theArrowAngle WingAngle))

(theRightAngle (- theArrowAngle WingAngle))

; calculate end points of both wings

(theLeftWingEndPointX (+ inPointToX (* theWingLength (sin theLeftAngle))))

(theLeftWingEndPointY (+ inPointToY (* theWingLength (cos theLeftAngle))))

(theRightWingEndPointX (+ inPointToX (* theWingLength (sin theRightAngle))))

(theRightWingEndPointY (+ inPointToY (* theWingLength (cos theRightAngle))))

(points (cons-array 4 'double))

(theMiddleWingEndPointX 0) (theMiddleWingEndPointY 0)

(PreviousOpacity 100.0)

(PreviousPaintMode 0)

)

(begin

(set! PreviousOpacity (car (gimp-context-get-opacity)))

(gimp-context-set-opacity 100.0)

(set! PreviousPaintMode (car (gimp-context-get-paint-mode)))

(gimp-context-set-paint-mode NORMAL-MODE)

; collect points for arrow-tail and draw them

; Now draw the arrow tail along the path in the higher level function rather than a straight line here

; accordingly for left wing

(aset points 0 inPointToX) (aset points 1 inPointToY)

(aset points 2 theLeftWingEndPointX) (aset points 3 theLeftWingEndPointY)

(gimp-paintbrush-default drawable 4 points) (set! points (cons-array 4 'double))

; accordingly for right wing

(aset points 0 inPointToX) (aset points 1 inPointToY)

(aset points 2 theRightWingEndPointX) (aset points 3 theRightWingEndPointY)

(gimp-paintbrush-default drawable 4 points)

; only if head is to be filled

(if (= FullHead 1) (begin

; calculate intersection of connection between the wings end points and arrow tail

; shrink distance between this point and arrow head if MiddlePoint < 100

(set! theMiddleWingEndPointX (+ inPointToX

(* (/ MiddlePoint 100) (- (/ (+ theLeftWingEndPointX theRightWingEndPointX) 2) inPointToX))

))

(set! theMiddleWingEndPointY (+ inPointToY

(* (/ MiddlePoint 100) (- (/ (+ theLeftWingEndPointY theRightWingEndPointY) 2) inPointToY))

))

; collect points for left wing end - intersection - right wing end & draw it

(set! points (cons-array 6 'double))

(aset points 0 theLeftWingEndPointX) (aset points 1 theLeftWingEndPointY)

(aset points 2 theMiddleWingEndPointX) (aset points 3 theMiddleWingEndPointY)

(aset points 4 theRightWingEndPointX) (aset points 5 theRightWingEndPointY)

(gimp-paintbrush-default drawable 6 points)

; collect points to create selection which will be filled with FG color

(set! points (cons-array 8 'double))

(aset points 0 inPointToX) (aset points 1 inPointToY)

(aset points 2 theLeftWingEndPointX) (aset points 3 theLeftWingEndPointY)

(aset points 4 theMiddleWingEndPointX) (aset points 5 theMiddleWingEndPointY)

(aset points 6 theRightWingEndPointX) (aset points 7 theRightWingEndPointY)

(gimp-image-select-polygon image CHANNEL-OP-REPLACE 8 points)

(gimp-edit-bucket-fill drawable FG-BUCKET-FILL NORMAL-MODE 100 0 FALSE 0 0)

(gimp-selection-none image)

))

(gimp-context-set-paint-mode PreviousPaintMode)

(gimp-context-set-opacity PreviousOpacity)

) ; begin

) ; let

) ; define

;-----------------------------------------------------------------------------------------

;

; Draw an arrow with curved wings

;

; On entry:

; P0x..P3y = the x,y coordinates of P0, P1, P2 and P3 for the Bézier curve

; t = the value of t at the back of the arrow

; half_wing_width = half the width of the back of the arrow (maximum wing width)

; drawable = the drawable

; image = the image

; full_head = 1 if the arrow head is to be filled, 0 otherwise

; middle_point = the percentage of the arrow length that is to be filled (iff full_head == 1)

; (75% fills more of the head than 25%)

; num_points = the number of points to use to construct the wings (3..99) (excludes the tip of the arrow)

; P0_end = 1 if the arrow is to be drawn at the P0 end of the path, = 0 for the P3 end

;

(define

(Draw_Curved_Wing_Arrow

P0x P0y P1x P1y P2x P2y P3x P3y

half_wing_width

drawable

image

full_head

middle_point

num_points

P0_end

arrow_length

)

(let*

(

(points1 (cons-array 200 'double)) ; points for one wing ...

(points2 (cons-array 200 'double)) ; ... and the other

(notch_points (cons-array 6 'double))

(in_fill_points (cons-array 406 'double)) ; used when filling the head of the arrow

(PreviousOpacity 100.0)

(PreviousPaintMode 0)

(count 1)

(t_adjustment 0.0)

(t_middle_point 0.0)

(bezier_results '(0.0 0.0))

(arrow_width 0.0)

(x 0.0) ; poisiton on the path

(y 0.0) ; poisiton on the path

(x_deriv 0.0) ; derivative wrt t of x

(y_deriv 0.0) ; derivative wrt t of y

(hypot 0.0) ; sqrt( x_deriv^2 + y_deriv^2)

(x_modifier 0.0)

(y_modifier 0.0)

(points_index 0)

(x_diff 0.0)

(y_diff 0.0)

)

(if (= P0_end 1)

(begin

(set! t_adjustment (/ t num_points))

(set! t_middle_point (* t middle_point))

(set! t_middle_point (/ t_middle_point 100.0))

(set! t 0.0) ; start at P0

(aset points1 0 P0x) ; set first point on one side of the arrowhead ...

(aset points1 1 P0y)

(aset points2 0 P0x) ; ... and the other

(aset points2 1 P0y)

)

(begin

(set! t_middle_point (- 1.0 t))

(set! t_adjustment (/ t_middle_point num_points))

(set! t_adjustment (- 0.0 t_adjustment))

(set! t_middle_point (* t_middle_point middle_point))

(set! t_middle_point (/ t_middle_point 100.0))

(set! t_middle_point (- 1.0 t_middle_point))

(set! t 1.0) ; start at P3

(aset points1 0 P3x) ; set first point on one side of the arrowhead ...

(aset points1 1 P3y)

(aset points2 0 P3x) ; ... and the other

(aset points2 1 P3y)

)

) ; end - if

; set the middle part of notch points based on t_middle_point in case the head has to be filled

(aset notch_points 2 (car (Bezier_Coords P0x P1x P2x P3x t_middle_point)))

(aset notch_points 3 (car (Bezier_Coords P0y P1y P2y P3y t_middle_point)))

(set! PreviousOpacity (car (gimp-context-get-opacity)))

(gimp-context-set-opacity 100.0)

(set! PreviousPaintMode (car (gimp-context-get-paint-mode)))

(gimp-context-set-paint-mode NORMAL-MODE)

(set! count 1)

(set! points_index 2)

(while (<= count num_points)

(set! t (+ t t_adjustment))

(set! bezier_results (Bezier_Coords P0x P1x P2x P3x t))

(set! x (car bezier_results))

(set! x_deriv (cadr bezier_results))

(set! bezier_results (Bezier_Coords P0y P1y P2y P3y t))

(set! y (car bezier_results))

(set! y_deriv (cadr bezier_results))

; calculate the width of the arrow based on the direct distance of

; x and y from the tip of the arrow (calculating the width with equal

; steps for each step in t gives a rounded tip to the arrow)

(set! x_diff (- (aref points1 0) x))

(set! y_diff (- (aref points1 1) y))

(set! hypot (sqrt (+ (* x_diff x_diff) (* y_diff y_diff))))

(set! arrow_width (/ (* hypot half_wing_width) arrow_length))

(set! hypot (sqrt (+ (* x_deriv x_deriv) (* y_deriv y_deriv))))

(if (> hypot 0.0)

(begin

(set! x_modifier (/ (* y_deriv arrow_width) hypot))

(set! y_modifier (/ (* x_deriv arrow_width) hypot))

(aset points1 points_index (+ x x_modifier))

(aset points2 points_index (- x x_modifier))

(set! points_index (+ points_index 1))

(aset points1 points_index (- y y_modifier))

(aset points2 points_index (+ y y_modifier))

(set! points_index (+ points_index 1))

)

(begin ; avoid division by 0

(aset points1 points_index x)

(aset points2 points_index x)

(set! points_index (+ points_index 1))

(aset points1 points_index y)

(aset points2 points_index y)

(set! points_index (+ points_index 1))

)

) ; end - if

(set! count (+ count 1))

) ; end - while

; draw the one wing

(gimp-paintbrush-default drawable points_index points1)

; draw the other wing

(gimp-paintbrush-default drawable points_index points2)

; only if head is to be filled

(if (= full_head 1)

(begin

(set! points_index (- points_index 1))

(aset notch_points 1 (aref points1 points_index)) ; y coord

(aset notch_points 5 (aref points2 points_index)) ; y coord

(set! points_index (- points_index 1))

(aset notch_points 0 (aref points1 points_index)) ; x coord

(aset notch_points 4 (aref points2 points_index)) ; x coord

(gimp-paintbrush-default drawable 6 notch_points)

(set! points_index 0)

(set! x 0)

(set! num_points (* num_points 2))

(while (< points_index num_points)

(aset in_fill_points x (aref points1 points_index))

(set! x (+ x 1))

(set! points_index (+ points_index 1))

) ; end - while

(set! y 0)

(while (< y 6)

(aset in_fill_points x (aref notch_points y))

(set! y (+ y 1))

(set! x (+ x 1))

) ; end - while

(while (> points_index 0)

(set! points_index (- points_index 1))

(set! y (aref points2 points_index))

(set! points_index (- points_index 1))

(aset in_fill_points x (aref points2 points_index))

(set! x (+ x 1))

(aset in_fill_points x y)

(set! x (+ x 1))

) ; end - while

(set! num_points (* num_points 2))

(set! num_points (+ num_points 6))

(gimp-image-select-polygon image CHANNEL-OP-REPLACE num_points in_fill_points)

(gimp-edit-bucket-fill drawable FG-BUCKET-FILL NORMAL-MODE 100 0 FALSE 0 0)

(gimp-selection-none image)

) ; end -begin

) ; end - if

(gimp-context-set-paint-mode PreviousPaintMode)

(gimp-context-set-opacity PreviousOpacity)

) ; let

) ; end - define Draw_Curved_Wing_Arrow()

;---------------------------------------------------------------------------------

;

; Return the x or y coordinate for a given value of t (0..1).

; Also return the first derivative for x or y at that point

;

; The equation for the Bézier curve is:

;

; B(t) = (1 - t)^3*P0 + 3(1 - t)^2*t*P1 + 3(1-t)*t^2*P2 + t^3*P3

;

; This can be rewritten as:

;

; t^3(P3 - 3P2 + 3P1 - P0) +

; t^2(3P2 - 6P1 + 3P0) +

; t(3P1 - 3P0) +

; P0

;

; the first derivative is then:

;

; 3t^2(P3 - 3P2 + 3P1 - P0) +

; 2t(3P2 - 6P1 + 3P0) +

; (3P1 - 3P0) +

;

; The x or y coordinate of the point is returned as the first item of a list and the

; first derivative of the point as the second item.

;

(define (Bezier_Coords P0 P1 P2 P3 t)

(let* (

(result 0.0)

(derivative 0.0) ; first derivative

(term1 0.0) ; P3 - 3P2 + 3P1 - P0

(term2 0.0) ; P2 - 2P1 + P0

(term3 0.0) ; P1 - P0

(t_cubed 0.0) ; t^3

(t_squared 0.0) ; t^2

)

(set! t_squared (* t t))

(set! t_cubed (* t_squared t))

(set! term1 (- P1 P2))

(set! term1 (* term1 3))

(set! term1 (+ term1 P3))

(set! term1 (- term1 P0))

(set! term2 (* P2 3))

(set! term2 (- term2 (* P1 6)))

(set! term2 (+ term2 (* P0 3)))

(set! term3 (- P1 P0))

(set! term3 (* term3 3))

(set! result (* t_cubed term1))

(set! result (+ result (* t_squared term2)))

(set! result (+ result (* t term3)))

(set! result (+ result P0))

(set! derivative (* t_squared (* term1 3)))

(set! derivative (+ derivative (* t (* term2 2))))

(set! derivative (+ derivative term3))

(list

result

derivative

)

) ; end - let

) ; define Bezier_Coords

;---------------------------------------------------------------------------------

(define

(script-fu-draw-arrow

image

drawable

WingLengthFactor

WingLengthType

WingAngle

FullHead

MiddlePoint

BrushThicknessFactor

BrushThicknessType

useFirstPointArrowAsHead

usePathThenRemove

useNewLayer

useDoubleHeadArrow

CurvedArrowhead

CurvedArrowheadPoints

)

(let*

(

(theActiveVector (car (gimp-image-get-active-vectors image)))

(theNumVectors (car (gimp-image-get-vectors image)))

(theFirstStroke 0) (theStrokePoints 0)

(theNumPoints 0)

(inPoint_1X 0) (inPoint_1Y 0) ; point 1 is for the arrow at the start of the path

; - the centre of the arrow lies along the section of the

; that joins the first two points (may be the only 2 points)

(inPoint_2X 0) (inPoint_2Y 0) ; point2 is for the arrow at the end of the path

; - the centre of the arrow lies along the section of the

; that joins the last two points (may be the only 2 points)

(Bezier_x 0.0)

(Bezier_y 0.0)

(arrow_depth 0.0)

(t 0.0)

(new_length 0.0)

(i 0.0)

(adjustment 0.0)

(x_diff 0.0)

(y_diff 0.0)

(half_arrowhead_width 0.0)

(theArrowLength 0) (theWingLength 0)

(oldLayer (car (gimp-image-get-active-layer image)))

(brushName "arrowBrush")

)

;---------------------------------------------------------------------------------

; La versione originale di queste 2 "define" era:

; (define FACTOR_RELATIVE_TO_PATH_LENGTH 0)

; (define FACTOR_IN_ABSOLUTE_PIXELS 1)

;

; Io ho solo invertito il loro ordine (e i valori), per avere un altro default.

; In questo modo le linee e le frecce hanno sempre uguale spessore.

; Nella versione originale, questo spessore è proporzionale alla lunghezza del tracciato

; e questo fa sì che ogni volta le frecce siano diverse una dall'altra.

; Personalmente preferisco il "mio" sistema - Ripley

;

; Inoltre ho modificato l'ordine delle stringhe nelle LIST [SF-OPTION] in fondo al listato

; (e qualche altro valore numerico)

;

; Questa era la versione originale

; Riga 698 SF-OPTION "Length of wings type" (list "Path length divided by LoW value" "LoW Pixels")

; Riga 703 SF-OPTION "Brush thickness type" (list "Path length divided by BT value" "BT Pixels")

;---------------------------------------------------------------------------------

(define FACTOR_IN_ABSOLUTE_PIXELS 0)

(define FACTOR_RELATIVE_TO_PATH_LENGTH 1)

(if (not (= theActiveVector -1)) (begin

(gimp-image-undo-group-start image)

(gimp-context-push)

; create new layer if asked to do so

(if (= useNewLayer 1) (begin

(set! drawable (car (gimp-layer-new image (car (gimp-image-width image))

(car (gimp-image-height image))

(+ 1 (* 2 (car (gimp-image-base-type image))))

"Arrow" 100 NORMAL-MODE )))

(gimp-image-insert-layer image drawable 0 0)

; set new layer completely transparent

(gimp-layer-add-mask drawable (car (gimp-layer-create-mask drawable ADD-BLACK-MASK)))

(gimp-layer-remove-mask drawable MASK-APPLY)

))

(if (> theNumVectors 1)

(gimp-message "There is more than one path defined -\nthe active path defines the arrow")

) ; end - if

; get path/vector points

(set! theFirstStroke (aref (cadr (gimp-vectors-get-strokes theActiveVector)) 0))

(set! theStrokePoints (caddr (gimp-vectors-stroke-get-points theActiveVector theFirstStroke)))

(set! theNumPoints (cadr (gimp-vectors-stroke-get-points theActiveVector theFirstStroke)))

(if (< theNumPoints 12)

(begin

(gimp-image-undo-group-end image)

(error '(This script needs a path with two points) (/ theNumPoints 6))

) ; end - begin

) ; end - if

(if (and (> theNumPoints 12) (= 0 multi_points_reported))

(begin

(gimp-message "This script needs a path with two points\nto position the arrow head and tail.\n\nThe path has more than two points\nThe first and second points are used")

(set! multi_points_reported 1) ; only report this once per activation of GIMP

) ; end - begin

) ; end - if

; get position of arrow head and arrow tail from active vector

(set! inPoint_1X (aref theStrokePoints 2)) ; for the arrow at the start of the path

(set! inPoint_1Y (aref theStrokePoints 3))

(set! inPoint_2X (aref theStrokePoints (- theNumPoints 4))) ; for the arrow at the end of the path

(set! inPoint_2Y (aref theStrokePoints (- theNumPoints 3)))

; calculate length of arrows depending on the length of the whole arrow

(set! theArrowLength (car (gimp-vectors-stroke-get-length theActiveVector 1 3.0)))

(if (= WingLengthType FACTOR_RELATIVE_TO_PATH_LENGTH)

(set! theWingLength (/ theArrowLength WingLengthFactor))

(set! theWingLength WingLengthFactor)

)

; define new brush for drawing operation

(gimp-brush-new brushName)

(gimp-brush-set-shape brushName BRUSH-GENERATED-CIRCLE)

(gimp-brush-set-spikes brushName 2)

(gimp-brush-set-hardness brushName 1.00)

(gimp-brush-set-aspect-ratio brushName 1.0)

(gimp-brush-set-angle brushName 0.0)

(gimp-brush-set-spacing brushName 1.0)

; Setting the radius of the brush at this time seems to have no effect in GIMP 2.8.14 - it

; uses the radius of the brush as specified in the toolbox. As a work-around the mod saves the radius of the

; toolbox brush, sets the new brush to be the default brush and then sets the radius of the toolbox brush. The

; toolbox brush radius is then restored afterwards

;

(gimp-context-set-brush brushName)

; set radius of brush according to length of arrow or to a set value

(if (= BrushThicknessType FACTOR_RELATIVE_TO_PATH_LENGTH)

(gimp-context-set-brush-size (/ theArrowLength BrushThicknessFactor))

(gimp-context-set-brush-size BrushThicknessFactor)

)

(set! arrow_depth (* theWingLength (cos (* (/ WingAngle 180) pi)))) ; the depth of the arrowhead

(set! half_arrowhead_width (sqrt (- (* theWingLength theWingLength) (* arrow_depth arrow_depth))))

; now find the line that is the arrowhead depth with one end at the first end of the path and the other

; on the path

(set! i 0.0)

(set! t 0.5)

(set! adjustment 0.25)

(while (< i 16.0)

(set! Bezier_x (car (Bezier_Coords (aref theStrokePoints 2)

(aref theStrokePoints 4)

(aref theStrokePoints 6)

(aref theStrokePoints 8)

t)))

(set! Bezier_y (car (Bezier_Coords (aref theStrokePoints 3)

(aref theStrokePoints 5)

(aref theStrokePoints 7)

(aref theStrokePoints 9)

t)))

(set! x_diff (- (aref theStrokePoints 2) Bezier_x))

(set! y_diff (- (aref theStrokePoints 3) Bezier_y))

(set! new_length (sqrt (+ (* x_diff x_diff) (* y_diff y_diff))))

(if (< new_length arrow_depth)

(set! t (+ t adjustment))

(set! t (- t adjustment))

)

(set! adjustment (/ adjustment 2))

(set! i (+ i 1.0))

) ; end - while

(if (or (= useFirstPointArrowAsHead 1) (= useDoubleHeadArrow 1))

(if (= CurvedArrowhead 1)

(begin

(Draw_Curved_Wing_Arrow (aref theStrokePoints 2)

(aref theStrokePoints 3)

(aref theStrokePoints 4)

(aref theStrokePoints 5)

(aref theStrokePoints 6)

(aref theStrokePoints 7)

(aref theStrokePoints 8)

(aref theStrokePoints 9)

half_arrowhead_width

drawable image

FullHead

MiddlePoint

CurvedArrowheadPoints

arrow_depth)

) ; end - begin

(begin

(script-fu-help-1Arrow inPoint_1X inPoint_1Y Bezier_x Bezier_y theWingLength (* (/ WingAngle 180) pi) drawable image FullHead MiddlePoint)

) ; end - begin

) ; end - if

; now find the line that is the arrowhead depth with one end at the second end of the path and the other

; on the path

(set! i 0.0)

(set! t 0.5)

(set! adjustment 0.25)

(while (< i 16.0)

(set! Bezier_x (car (Bezier_Coords (aref theStrokePoints (- theNumPoints 10))

(aref theStrokePoints (- theNumPoints 8))

(aref theStrokePoints (- theNumPoints 6))

(aref theStrokePoints (- theNumPoints 4))

t)))

(set! Bezier_y (car (Bezier_Coords (aref theStrokePoints (- theNumPoints 9))

(aref theStrokePoints (- theNumPoints 7))

(aref theStrokePoints (- theNumPoints 5))

(aref theStrokePoints (- theNumPoints 3))

t)))

(set! x_diff (- (aref theStrokePoints (- theNumPoints 4)) Bezier_x))

(set! y_diff (- (aref theStrokePoints (- theNumPoints 3)) Bezier_y))

(set! new_length (sqrt (+ (* x_diff x_diff) (* y_diff y_diff))))

(if (< new_length arrow_depth)

(set! t (- t adjustment))

(set! t (+ t adjustment))

)

(set! adjustment (/ adjustment 2))

(set! i (+ i 1.0))

) ; end - while

(if (or (= useFirstPointArrowAsHead 0) (= useDoubleHeadArrow 1))

(if (= CurvedArrowhead 1)

(begin

(Draw_Curved_Wing_Arrow (aref theStrokePoints (- theNumPoints 10))

(aref theStrokePoints (- theNumPoints 9))

(aref theStrokePoints (- theNumPoints 8))

(aref theStrokePoints (- theNumPoints 7))

(aref theStrokePoints (- theNumPoints 6))

(aref theStrokePoints (- theNumPoints 5))

(aref theStrokePoints (- theNumPoints 4))

(aref theStrokePoints (- theNumPoints 3))

half_arrowhead_width

drawable image

FullHead

MiddlePoint

CurvedArrowheadPoints

arrow_depth)

) ; end - begin

(begin

(script-fu-help-1Arrow inPoint_2X inPoint_2Y Bezier_x Bezier_y theWingLength (* (/ WingAngle 180) pi) drawable image FullHead MiddlePoint)

) ; end - begin

) ; end - if

(gimp-edit-stroke-vectors drawable theActiveVector) ; draw the shaft of the arrow along the path

(gimp-brush-delete brushName)

(gimp-context-pop)

(if (= usePathThenRemove 1) (gimp-image-remove-vectors image theActiveVector))

(if (= useNewLayer 1) (begin

(plug-in-autocrop-layer TRUE image drawable)

(gimp-image-set-active-layer image oldLayer)

))

(gimp-displays-flush)

(gimp-image-undo-group-end image)

) ; end - begin

(gimp-message "This script needs a path with two points\nto position the arrow head and tail (first and last point of path is used)")

) ; end - if

) ; let*

); define

; Register the function with GIMP:

(script-fu-register "script-fu-draw-arrow"

_"<Image>/Tools/Arrow..."

_"Draw a nearly arbitrary arrow in your image"

"Berengar W. Lehr <B-Ranger@web.de>"

"2009, Berengar W. Lehr / MPG@IDIR, UH Jena, Germany."

"19th November 2009"

"*"

SF-IMAGE "The image" 0

SF-DRAWABLE "The drawable" 0

SF-ADJUSTMENT "Length of wings (LoW)" '(50 1 500 1 10 1 1)

SF-OPTION "Length of wings type" (list "LoW Pixels" "Path length divided by LoW value")

SF-ADJUSTMENT "Angle between arrow and wing in degrees" '(20 5 85 5 15 0 0)

SF-TOGGLE "Fill head of arrow?" TRUE

SF-ADJUSTMENT "Percentage size of notch of arrow head\n(only valid if head of arrow is filled)" '(75 0 100 1 10 0 1)

SF-ADJUSTMENT "Brush thickness (BT)" '(10 1 500 1 10 0 1)

SF-OPTION "Brush thickness type" (list "BT Pixels" "Path length divided by BT value")

SF-TOGGLE "Use first path point as arrow head?\n(if not the last path point of is used as arrow head)" FALSE

SF-TOGGLE "Delete path after arrow is drawn?" TRUE

SF-TOGGLE "Use new layer for arrow?" TRUE

SF-TOGGLE "Draw double headed arrow?" FALSE

SF-TOGGLE "Curved arrow wings? (only for curved paths)" FALSE

SF-ADJUSTMENT "Points for curved arrow wing (2 to 99)" '(20 2 99 1 10 0 1)

)

Creare un file con estensione .snc ed incollare il codice, oppure Scarica il file , e inserirlo nella cartella degli script. Puoi controllare la cartella degli script andando in Gimp -> Modifica -> Preferenze, nella finestra che si apre, scegliere sulla sinistra la voce Cartelle ( ultima in basso ) e cliccare poi sulla voce Script, verrà visualizzato i percorsi in cui Gimp leggerà gli script inseriti.
Riavviare Gimp al termine dell’operazione.

Lascia un commento Annulla risposta